GW Instek PCS-1000 - Manual (Page 61)

COMMUNICATION INTERFACE
61
Configure Commands
CONFigure .................................................................. 61
CONFigure:CURRent .................................................. 62
CONFigure:CURRent[:DC] ......................................... 62
CONFigure:CURRent:AC ............................................ 63
CONFigure:VOLTage.................................................. 63
CONFigure:VOLTage[:DC] ......................................... 64
CONFigure:VOLTage:AC ............................................ 65
CONFigure:AVERage:MODE ..................................... 65
CONFigure
Query
Description The CONFigure query will return both the current
and voltage configuration as a string.
Query Syntax CONFigure?
Return Parameter Current mode, range unit, voltage mode,
range unit.
Query Example CONF?
>”CURR:DC 0.01,VOLT:DC 0.1”
Note
The range that is returned is the base unit. See the
table below:
Unit Voltage Range Current Range
1000 1000VDC N/A
600 600ACV N/A
100 200V 300A
10 20V 30A
1 2V 3A
0.1 200mV 300mA
0.01 N/A 30mA