GW Instek AFG-2000 User Manual - Manual (Page 91)

REMOTE INTERFACE
89
SOURce1:FREQuency? MINimum
SOURce1:FREQuency?
Braces { } Commands that contain braces indicate one item
within the braces must be chosen. Braces are not
sent with the command.
Angled Brackets
< > Angle brackets are used to indicate that a value
must be specified for the parameter. See the
parameter description below for details. Angled
brackets are not sent with the command.
Bars | Bars are used to separate multiple parameter
choices in the command format.
Parameters Type Description Example
Boolean logic 0, 1/ON,OFF
integers 0, 1, 2, 3
decimal numbers 0.1, 3.14, 8.5
floating point 4.5e-1, 8.25e+1
any of NR1, 2, 3 1, 1.5, 4.5e-1
NRf type with a
suffix including
MINimum,
MAXimum or
DEFault
parameters. 1, 1.5, 4.5e-1
MAX, MIN,
DEF
Arbitrary ASCII
characters.
Discrete ASCII
character
parameters IMM, EXT,
MAN
in Hz>
NRf+ type
including
frequency unit
suffixes. 1 KHZ, 1.0 HZ,
ΜHZ