GW Instek AFG-2000 User Manual - Manual (Page 102)

AFG-2000 Series User Manual
100
-5V ~ +5V (50Ω)
*AFG-2005/2105 limited to 5MHz, AFG-2012/2112
limited to 12MHz.
Example SOURce1:APPL:NOIS DEF, 5.0, 2.0
Sets the amplitude to 5 volts with an offset of 2
volts.
SOURce[1]:APPLy:USER
Set
Description Outputs an arbitrary waveform that is specified
from the FUNC:USER command.
Note
Frequency and amplitude values are not used with
this function; however a value (or DEFault) must
be specified. The values are remembered for the
next function used.
Syntax SOURce[1]:APPLy:USER [ [,
[,] ]]
Parameter 0.1Hz~10MHz
1mV~10V (50Ω)
-5V ~ +5V (50Ω)
Example SOUR1:APPL:USER
Outputs the ARB waveform specified in the
FUNC:USER command.
SOURce[1]:APPLy?
Query
Description Outputs a string with the current settings.
Note
The returned string can be passed back, when
appended to the Apply Command. This is
intended to be used to return the function
generator to a known state.
I.e., SOURce[1]:APPL:
Query Syntax SOURce[1]:APPLy?