GW Instek AFG-2000 User Manual - Manual (Page 122)

AFG-2000 Series User Manual
120
Example SOUR1:FSK:STAT ON
Enables FSK modulation.
Query Syntax SOURce[1]:FSKey:STATe?
Return Parameter 0 Disabled (OFF)
1 Enabled (ON)
Query Example SOUR1:FSK:STAT?
>1
FSK modulation is currently enabled.
SOURce[1]:FSKey:SOURce
Set
Query
Description Sets or queries the FSK source as internal or
external. Internal is the default source.
Note
If an external FSK source is selected, FSK rate is
controlled by the Trigger input port on the rear
panel.
Syntax SOURce[1]:FSKey:SOURce {INTernal|EXTernal}
Example SOUR1:FSK:SOUR EXT
Sets the FSK source to external.
Query Syntax SOURce[1]:FSKey:SOURce?
Return Parameter INT Internal
EXT External
Query Example SOUR1:FSK:SOUR?
>INT
The FSK source is set to internal.
SOURce[1]:FSKey:FREQuency
Set
Query
Description Sets the FSK hop frequency. The default hop
frequency is set to 100Hz.