GW Instek AFG-2000 User Manual - Manual (Page 139)

APPENDIX
137
AFG-2000 Series Specifications
The specifications apply when the function generator is powered on
for at least 30 minutes under +20°C~+30°C.
AFG-2000 models 2005 2012 2025 2105 2112 2125
Waveforms Sine, Square, Ramp, Noise, ARB
Arbitrary Functions
Sample Rate 20 MSa/s
Repetition Rate 10MHz
Waveform Length 4k points
Amplitude
Resolution 10 bits
Non-Volatile
Memory 4k points
Frequency Characteristics
Range Sine 0.1Hz~
5MHz
0.1Hz~
12MHz
0.1Hz~
25MHz
0.1Hz~
5MHz
0.1Hz~
12MHz
0.1Hz~
25MHz
Square 0.1Hz~
5MHz
0.1Hz~
12MHz
0.1Hz~
25MHz
0.1Hz~
5MHz
0.1Hz~
12MHz
0.1Hz~
25MHz
Triangle, Ramp 1MHz
Resolution 0.1Hz
Accuracy Stability ±20 ppm
Aging ±1 ppm, per 1 year
Tolerance ≤ 1 mHz
Output Characteristics
Amplitude Range 1 mVpp to 10 Vpp (into 50Ω)
2 mVpp to 20 Vpp (open-circuit)
1 mVpp to 5 Vpp (into 50Ω) for 20MHz-
25MHz
2 mVpp to 10 Vpp (open-circuit) for
20MHz-25MHz
Accuracy ± 2% of setting ±1 mVpp
(at 1 kHz)
Resolution 1 mV or 3 digits
Flatness ± 1% (0.1dB) ≤100kHz
± 3% (0.3 dB) ≤5MHz
± 5% (0.4 dB) ≤12MHz
±20%(2dB)≤20MHz
± 5% (0.4 dB) ≤25MHz
(sine wave relative to 1 kHz)
Units Vpp, Vrms, dBm