GW Instek AFG-2000 User Manual - Manual (Page 34)

AFG-2000 Series User Manual
32
Default Settings
The default settings appear each time the power is turned on.
Output Config. Function Sine wave
Frequency 1kHz
Amplitude 100mVpp
Offset 0.00Vdc
Output units Vpp
Output terminal 50Ω
Output impedance 50Ω
Modulation
(AM/FM/FSK)
Carrier Wave 1kHz Sine wave
Modulation waveforms 100Hz Sine wave
AM Depth 100%
FM Deviation 10Hz
FSK Hop Frequency 100Hz
FSK Frequency 500Hz
Modulation Status Off
Sweep Start/Stop frequency 100Hz/1kHz
Sweep time 1s
Sweep rate 100Hz
Sweep type Linear
Sweep status Off