GW Instek AFG-2000 User Manual - Manual (Page 133)

REMOTE INTERFACE
131
SOURce[1]:FUNCtion USER
Set
Query
Description Use the SOURce[1]:FUNCtion USER command to
output the arbitrary waveform currently selected
in memory. The waveform is output with the
current frequency, amplitude and offset settings.
The query returns the current output.
Syntax SOURce[1]:FUNCtion USER
Example SOUR1:FUNC USER
Selects and outputs the current waveform in
memory.
Query Syntax SOURce[1]:FUNCtion?
Return Parameter SIN Sine wave
SQU Square wave
RAMP Ramp wave
NOIS Noise wave
ARB Arbitrary wave
Query Example SOURce1:FUNCtion?
>SQU
A square waveform is the current output.
DATA:DAC
Set
Description The DATA:DAC command is used to download
binary or decimal integer values into memory
using the IEEE-488.2 binary block format or as an
ordered list of values. After the values have been
downloaded into memory the
SOURce[1]:FUNCtion USER command can be used
to output the ARB waveform in memory.
Note The integer values (±511) correspond to the
maximum and minimum peak amplitudes of the