GW Instek AFG-2000 User Manual - Manual (Page 73)

OPERATION
71
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the rate.
→
Enter
Use the keypad
and the relevant
unit key to enter a
new rate.
0 /
3 2 1
4
7 8
5
9
6
→
Hz/Vpp
kHz/Vrms
Range
Sweep Rate 1kHz ~ 2mHz (1ms ~ 500s)
Default 100Hz
Example:
Rate= 100Hz
Setting the Sweep Source (Trigger)
With the source set to EXT, the function generator will sweep each
time a trigger signal is received. After a sweep output has completed,
the function generator waits for a trigger signal before starting the
next sweep. The default trigger source is internal.
Panel Operation 1. Press the Shift + INT/EXT
key to select the
modulation source. Shift
+
INT/EXT
kHz/Vrms
→