GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 8)

GDS-1000A-U Programming Manual
8
C
OMMAND OVERVIEW
The Command overview chapter lists all GDS-
1000A-U commands in functional order. The
command syntax section shows you the basic
syntax rules you have to apply when using
commands.
Command Syntax
Compatible
standard  USB CDC_ACM compatible
 SCPI, 1994 (partially compatible)
Command format
trig:del:mod LF
1 2 3 4
1: command header
2: single space
3: parameter
4: message terminator
Parameter Type Description Example
boolean logic 0, 1
Integers 0, 1, 2, 3
decimal numbers 0.1, 3.14, 8.5
floating point 4.5e-1, 8.25e+1
any of NR1, 2, 3 1, 1.5, 4.5e-1
Message
terminator LF^END line feed code (hexadecimal 0A)
with END message
LF line feed code
^END last data byte with END message
Note Commands are non-case sensitive.