GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 52)

GDS-1000A-U Programming Manual
52
:MEASure:ROVShoot
Query
Description Returns rise overshoot amplitude in percentage.
Same as: Measure key → F1~F5 → F3 (ROVShoot)
Syntax < Long > < Short >
:measure:rovshoot? :meas:rovs?
Returns with % sign
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:rovshoot? Selects Channel 1, and
then measures the rise
overshoot.
:MEASure:RPReshoot
Query
Description Returns rise overshoot amplitude in percentage.
Same as: Measure key → F1~F5 → F3 (RPReshoot)
Syntax < Long > < Short >
:measure:rpreshoot? :meas:rpr?
Returns with % sign
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:rpreshoot? Selects Channel 1, and
then measures the rise
preshoot.
:MEASure:SOURce
Set
Query
Description Selects the measurement channel.
Same as: Measure key → F1~F5 → F1, F2