GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 67)

COMMAND DETAILS
67
Data Log Commands
:DATALOG:STATE .......................................................67
:DATALOG:SOURce ....................................................67
:DATALOG:SAVe .........................................................68
:DATALOG:INTerval ....................................................68
:DATALOG:DURation ..................................................68
:DATALOG:STATE
Set
Query
Description Turns the datalogging function on/off.
Same as: Utility key → More (F5) →Data Logging
Menu(F3)→Data Logging (F1).
Syntax < Long > < Short >
:DATALOG:STATE {0|1}
:DATALOG:STATE? :DATALOG:STATE
{0|1}
:DATALOG:STATE?
Parameter/
Return parameter 0 Off. Stop data logging function.
1 On. Start data logging function.
Example :DATALOG:STATE 1 Turn data logging on.
:DATALOG:SOURce
Set
Query
Description Sets or queries the data logging source channel.
Syntax < Long > < Short >
:DATALOG:SOURce{1|2}
:DATALOG:SOURce? :DATALOG:SOUR{1|2}
:DATALOG:SOUR?
Parameter/
Return parameter 1 Sets CH1 as the source channel
2 Sets CH2 as the source channel
Example :DATALOG:SOUR 1 Set source as CH1.