GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 59)

COMMAND DETAILS
59
:GONogo:NGCount?
Query
Description Returns the test result count ratio (failed count,
total count).
Syntax < Long > < Short >
:GON:NGC? :GON:NGC?
Return parameter , ,
Example :GON:NGC?
>2,128 2 fails from 128 Go-
NoGo tests.
:GONogo:NGDefine
Set
Query
Description Sets or queries the Go-NoGo boundary template
conditions.
Note Before any Go-NoGo command can be used,
please use the :GONogo:FUNCtion 1 command to
initialize the oscilloscope.
Syntax < Long > < Short >
:GONogo:NGDefine {0|1}
:GONogo:NGDefine? :GON:NGD {0|1}
:GON:NGD
Parameter/
Return parameter 0 No-Go when the waveform doesn’t
exceed the boundary template.
1 No-Go when the waveform exceeds the
boundary template.
Example :GON:NGD 1 NoGo conditions set
to when outside
template.
:GONogo:SOURce
Set
Query
Description Sets the Go-NoGo channel source.