GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 55)

COMMAND DETAILS
55
:MEASure:VMAX
Query
Description Returns the maximum amplitude.
Same as: Measure key → F1~F5 → F3 (Vmax)
Syntax < Long > < Short >
:measure:vmax? :meas:vmax?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vmax? Selects Channel 1, and
then measures the
maximum amplitude.
:MEASure:VMIN
Query
Description Returns the minimum amplitude.
Same as: Measure key → F1~F5 → F3 (Vmin)
Syntax < Long > < Short >
:measure:vmin? :meas:vmin?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vmin? Selects Channel 1, and
then measures the
minimum amplitude.
:MEASure:VPP
Query
Description Returns the peak-to-peak amplitude (difference
between maximum and minimum amplitude)
Same as: Measure key → F1~F5 → F3 (Vpp)