GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 49)

COMMAND DETAILS
49
:MEASure:FPReshoot
Query
Description Returns fall preshoot amplitude.
Same as: Measure key → F1~F5 → F3 (FPREShoot)
Syntax < Long > < Short >
:measure:fovshoot? :meas:fovs?
Returns with % sign
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:fall? Selects Channel 1, and
then measures the fall
preshoot.
:MEASure:FREQuency
Query
Description Returns the frequency value.
Same as: Measure key → F1~F5 → F3 (Frequency)
Syntax < Long > < Short >
:measure:frequency? :meas:freq?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:frequency? Selects Channel 1, and
then measures the
frequency.
:MEASure:NWIDth
Query
Description Returns the first negative pulse width timing.
Same as: Measure key → F1~F5 → F3 (–Width)
Syntax < Long > < Short >