GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 53)

COMMAND DETAILS
53
Syntax < Long > < Short >
:measure:source
:measure:source? :meas:sour
:meas:sour?
Parameter
1 ~ 2 Channel1 ~ 2
Example :measure:source 1
:measure:rprshoot? Selects Channel 1, and
then measures the rise
preshoot.
:MEASure:VAMPlitude
Query
Description Returns the voltage difference between positive
and negative peak.
Same as: Measure key → F1~F5 → F3 (Vamp)
Syntax < Long > < Short >
:measure:vamplitude? :meas:vamp?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vamplitude? Selects Channel 1, and
then measures the rise
Voltage amplitude.
:MEASure:VAVerage
Query
Description Returns the average voltage.
Same as: Measure key → F1~F5 → F3 (Vavg)
Syntax < Long > < Short >
:measure:vaverage? :meas:vavg?
Returns
Note Before using this command, select the
measurement channel. See the example below.