GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 50)

GDS-1000A-U Programming Manual
50
:measure:nwidth? :meas:nwid?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:nwidth? Selects Channel 1, and
then measures the
negative pulse width.
:MEASure:PDUTy
Query
Description Returns the positive duty cycle ratio.
Same as: Measure key → F1~F5 → F3 (DutyCycle)
Syntax < Long > < Short >
:measure:pduty? :meas:pdut?
Returns as the percentage
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:pduty? Selects Channel 1, and
then measures the
positive duty cycle.
:MEASure:PERiod
Query
Description Returns the period.
Same as: Measure key → F1~F5 → F3 (Period)
Syntax < Long > < Short >
:measure:period? :meas:per?
Returns
Note Before using this command, select the
measurement channel. See the example below.