GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 56)

GDS-1000A-U Programming Manual
56
Syntax < Long > < Short >
:measure:vpp? :meas:vpp?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vpp? Selects Channel 1, and
then measures the
peak-to-peak
amplitude.
:MEASure:VRMS
Query
Description Returns the root-mean-square voltage.
Same as: Measure key → F1~F5 → F3 (Vrms)
Syntax < Long > < Short >
:measure:vrms? :meas:vrms?
Returns
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vrms? Selects Channel 1, and
then measures the root
mean square voltage.