Using position presets, Adding a preset position, Renaming a preset position – Avigilon View User Manual

Page 102

Text mode
Original mode

4. Click Apply.

NOTE: You can set up to 7 additional position presets. To do so, complete the steps in Using Position Presets
below

Using Position Presets

Each PTZ camera can have up to 7 position presets, in addition to the default Home position.

NOTE: Analytics operates only when the camera is in the Home position. Once the camera has left this position,
analytics will not be active until the camera has returned to the Home position.

Adding a Preset Position

1. Position the camera in the preset position you want.

2. Click Add Preset.

3. To add another preset, simply reposition the camera and click Add Preset again.

Renaming a Preset Position

You can rename your preset positions for easier identification. You cannot rename the Home preset.

1. Select the preset you want to rename.

2. Click Rename Preset...

102

Using Position Presets