Spectra Precision Survey Pro v5.4 User Manual

Page 98

• [8]: Provides access to Survey Pro settings:

–

Units tab: Used to set distance and angle units, directions, azimuth type
and the order in which to display/deliver coordinates.

–

Format tab: Used to set the number of decimal places displayed by the
instrument for each type of measurement.

–

Quick Shot tab: Used to choose which results to display (HA, ZA, SD or
HA, HD, VD) and which function to assign to the Measurement key
(

Measure Only or Measure and Store). Measure and Store requires an open

job. See Working With a Job Open on page 90.)

• [9]: Used to exit.

Function buttons:

(More functions are available from these buttons with a job open. See Working
With a Job Open on page 90.)

The left-arrow button located before each function button opens a related
menu. Tapping directly on the function button is equivalent to selecting the
first option on the menu.

• [10]: Sets the circle to 0 or to any value you specify.

• [11]: (Robotic instrument only) Turns to angles you specify, or to flip the

instrument.

• [12]: (Robotic instrument only) Starts the search target or LockNGo

function or stops the one you last activated.

• [13]: Opens or creates a job where measurements will be stored.

Result pane:

(Item [14]) on the screen example.)

Depending on how you set the

Display field on the Quick Shot tab (see [8]

above), this pane will either provide the measured values of:

• Horizontal angle (HA), zenith angle (ZA) and slope distance (SD)

• Or horizontal angle (HA), horizontal distance (HD) and vertical distance

(VD).

Tapping on the display over these labels will also toggle between the display
modes.