Spectra Precision Survey Pro v5.4 User Manual

Page 72

• Step 3: The calibration results page will solve the calibration and display

the results.

You can change the contribution of your control points to the calibration
solution by tapping on the columns next to each point name in the list:

– Tap in the

H column to deselect or select a point to be used in the

horizontal calibration.

– Tap in the

V column to deselect or select a point to be used in the

vertical calibration.

Any time you change the contribution of a control point, the

Finish button

will change to a

Re-Solve button. Tap this button to re-solve the calibration

using the new contribution of that control point.

Tap Finish to accept
the good calibration

Tap Finish to accept the solution anyway

Tap Add Point to collect more
control points, as in Step 2.

Yes

From Step 2

To Step 2

Blunders

Detected

Control points

are spaced evenly

and have good

geometry?

Blunder

Detection Runs

No Blunders

Detected