Spectra Precision Survey Pro v5.4 - Manual (Page 66)

56
Collecting Features
Tap Feature on the Data Collection screen. Features can be collected using one
of the methods below. In all methods, each new point name is incremented
automatically to the next available name.
•
Time Interval: After accepting the first point, additional points will
automatically be stored after the specified time interval (in seconds) has
elapsed.
• Dist Interval - 2D or 3D: After accepting the first point, additional points will
automatically be stored after traveling the specified 2D or 3D distance.
• Hold Still For: After accepting the first point, additional points are
automatically stored when the pole is held in the same spot for the
specified interval of time (in seconds).
• Manual: Prompt Once: Will store points in the same way as Topo SS from the
Data collection screen, incrementing the point name automatically after
each stored point.
• Manual: Prompt Every Point: Same as Manual: Prompt Once except that you are
prompted for a new description, layer and attribute with each point stored.
When shown, Interval is the field where you should enter the time or distance
interval used for continuous data collection.
Use the Update Rate field to set the speed at which the rover receiver should
deliver position solutions. When Five Hz is selected, the receiver will compute
positions five times a second minimizing the measurement latency.