Seed Hawk AIRCART 2013 - Manual (Page 69)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 64
You can also view the actual system pressure while seeding by selecting it as a display item. The
monitor will display the applied down pressure on the run screen. REFER TO SECTION 7.2.4 for
more information. To add this to the display press any of the soft keys to bring up the soft key
menu, then press “Item”. A highlight box will appear over the upper LH window. Navigate the
highlight box to the display window you want to place the shank down pressure information
and press “Enter”. A menu will appear with a list of all the items you can display in the window.
Navigate to “Shank” and press “Enter”.
NOTE: The window item selection is time limited. If no action is taken after selecting “Item”
from the soft key menu the monitor will cancel the function.
NOTE: The correct item type for this function is “Shank”. There is also a selection choice called
“Pressure”. This is reserved for an optional pressure measurement sensor for use with the
MUX sensor system.