Seed Hawk AIRCART 2013 User Manual
Page 61
SEED HAWK
®
AIRCART OPERATOR’S MANUAL 56
Step 5: Empty product from calibration bucket caught
during the Prime cycle.
Reposition calibration bucket under meter and select
"Calibrate".
Step 6: Meter will begin to turn. Stop the meter by
selecting "Continue".
Step 7: Enter the total weight of product caught minus the
weight of the empty calibration bucket.
Select "OK" when finished.
Step 8: Calibration for this meter is now complete, repeat steps to calibrate remaining meters.
NOTE: REFER TO THE CALIBRATION GUIDE FOR ALTERNATIVE TIPS AND RECOMMENDATIONS
FOR CALIBRATING THE AIRCART METERS.
ATTENTION: DO NOT include the weight of the calibration bucket in the metered weight
value. The monitor MUST be powered down properly by pressing and holding the power
button until the monitor powers down. Failure to do so will result in lost data.