Seed Hawk AIRCART 2013 - Manual (Page 40)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 35
6.0 AIR DRILL MONITOR INTRODUCTION
The Loup III and Seed Hawk Viper Pro™ monitor are capable of displaying:
‐ Ground Speed and Acres
‐ Fan Speeds
‐ Meter Speeds
‐ Meter Application Rates
‐ Hopper Levels
‐ Liquid Flow Meter
‐ Hydraulic Pressure
‐ Field Area
‐ Total Area
The monitors will alert the operator if it detects any of the following conditions:
‐Low Meter Speed
‐Low Bin Levels
‐Loss of Tractor Ground Speed
‐Low or High Fan Speed
These settings, as well as the Field and Total Acres are stored in non‐volatile memory. This
means that the information is retained even when power is disconnected.
This Manual will familiarize you with installation, calibration, operation and technical
information. All aspects are detailed but may not be applicable to your particular system
configuration.
For further information on the operation of the Seed Hawk Viper Pro™ Monitor see the Raven
– Seed Hawk Viper Pro™ manual.