Seed Hawk AIRCART 2013 - Manual (Page 25)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 20
4.2.2 OPERATING THE AUGER
1. Ensure that all screens and shrouds are in
place and that the cleanout gate, on the
bottom of each meter, is closed, Figure 8.
2. Activate tractor hydraulic circuit #4, and
pull the diverter valve up to the auger
circuit.
3. The handle on the auger tube is the control
to operate the auger flighting in a forward
or reverse direction.
4. Whether filling or unloading the aircart, the
auger performs at its highest capacity when
product is falling directly into the flighting.
4.2.3 AUGER POSITION FOR UNLOADING AIRCART
1. Using your remote, allow the auger tube to
pivot under any of the aircart compartments
in order to empty them, Figure 9.
2. Loosen the cross thumb‐nuts on the
cleanout gate, Figure 8, and slide it up to
allow product to fall between the airstream
tubes.
3. Once emptied, the bottom airstream door
can be removed for complete cleanout
below the meter.
Figure 8
Figure 9