Seed Hawk AIRCART 2013 - Manual (Page 53)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 48
7.3.2 GLOBAL SETTINGS
Use this menu selection to set the units of
measure, language, implement width, the
volume of the alarm, the backlight and contrast
of the screen, and the master switch mode. To
access the Global Settings from the run screen
press any soft key to bring up the soft key menu
and press “Setup”. Navigate the highlight bar to
the “Global Settings” selection and press
“Enter”. Insert photo (s).
At this screen you can review the basic system setup and make changes as necessary. To make
changes, navigate the highlight box to the item you wish to adjust and press “Enter”. A drop
down box will appear and show you the choices. Navigate to the choice you want and press
enter.
1. Units: Available choices are Metric, Imperial,
and US Imperial. Navigate to the selection you
want and press “Enter”.
2. Language: Available choices are English,
Russian, French, Spanish, and German.
Navigate to the selection you want and press
“Enter”.