Seed Hawk AIRCART 2013 - Manual (Page 55)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 50
6. Contrast: Sets the display contrast.
Navigate to this selection and press the
spinner knob to highlight the item. Rotate
the spinner knob to increase or decrease the
contrast and press the spinner knob or
“Enter” to set the new contrast setting.
7. Master switch mode: The choices are
“Manual” and “Auto”. Manual is used when
the operator engages and disengages the
drive by pressing the “ACK” button at the
beginning and end of each pass. Auto is used
when a lift switch on the implement engages
and disengages the drive. Manual is the
normal mode of operation.
8. OK/Cancel: Select “OK” to save any
changes that have been made or Cancel to
ignore changes that have been made.