Seed Hawk AIRCART 2013 User Manual

Page 60

Text mode
Original mode

SEED HAWK

AIRCART OPERATOR’S MANUAL 55

7.3.5.3 LOUP CALIBRATION PROCEDURE

Step 1: Select "Meter Calibration" from the Menu Settings.

Step 2: Select the desired meter to calibrate.

Step 3: Set to the desired shaft speed and select
"Prime".

NOTE:  It is important to calibrate as close to the actual seeding RPM of the roller. Reference
the “Roller RPM Chart” on page 75, to get an approximate roller RPM for the specific roller and
drill width.

Step 4: Meter will turn 2 revolutions to ensure meter roller
is full of product.