Seed Hawk AIRCART 2013 - Manual (Page 13)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 8
2.5 HYDRAULIC SAFETY
 Ensure that all hydraulic system components are kept clean and in proper working condition.
 Periodically inspect condition of hydraulic hoses, lines and components and remove and
replace any parts showing damage or deterioration.
 Use only repair or replacement parts specified by the manufacturer.
 Make repairs following instructions provided by the manufacturer.
 Wear appropriate personal protective equipment when unsure if residual pressure may exist
in hydraulic components during trouble‐shooting and or making repairs.
 Use a piece of cardboard or wood to check for hydraulic leaks.
 Ensure all fittings, couplings and other hydraulic connections are intact and properly
tightened before operating implement hydraulic system.
 Ensure that all persons operating, adjusting, maintaining and/or repairing the implement
know procedures and how to seek or summon medical assistance should an injury occur.
2.6 TRANSPORT SAFETY
 Ensure that drill or aircart is attached to tractor properly.
 Ensure drawbar hitch pin retainer is in place and functioning properly.
 Ensure safety tow chain is securely attached.
 Ensure all lighting and implement marking devices are intact and visible.
 Ensure implement is properly marked according to local road regulations.
 Read all local road traffic regulations.
 Do not exceed 32 km/h (20 mi/hr).
 NOT RECOMMENDED TO TRANSPORT WHILE LOADED.