Seed Hawk AIRCART 2013 - Manual (Page 43)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 38
7.1.2 FUNCTION KEYS
Function Key Descriptions
 Power: When the monitor is off, pressing the Power Key will turn the monitor on. When the monitor is
on, pressing and holding the Power Key for 5 seconds will turn the monitor off.
NOTE: Always use the power key to turn the monitor off. This puts the monitor through a save process
and it will store any accumulated information or changed settings to the non‐volatile memory. Cutting
power to the monitor by shutting off the ignition may cause some information to be lost or setting
changes to not be saved.
 Escape: Pressing the Escape button while in any menu will exit without making any changes. Many of the
functions for entering and navigating around the screen are duplicated by the controls. For example;
moving highlight boxes can be done by pressing the Up/Down/Right/Left Arrows or by using the Selector
Knob. The function of the “Enter” key is usually duplicated by pressing the Selector Knob as well. The only
time the “Enter” button must be used instead of the Selector Knob is when entering and saving values
from drop down key pads on the screen.
 Enter: Pressing the Enter Key will act as a “Select Button” or “Enter Button”, on any highlighted menu
selections.
 Selector Knob and Toggle: This Selector Knob is used for navigation within menus. Turning the Selector
Knob clockwise or counter clockwise will change highlighted menu selections. The Toggle is activated by
pressing down on the Selector Knob. The Toggle acts as a “Select Button” or “Enter Button”.
 Navigation Keys: These keys are used for navigation within menus. By pressing the desired direction key,
your highlighted selection will change accordingly.
 Activate Clutch Key (ACK): This key is used to engage your clutch or disengage your clutch. (Reminder:
Clutch Status is indicated in the Top Section of the Display).
 Meter Rate Screen: Pressing this button brings up a screen which allows adjusting meter application rates
and turning meters on and off.
 Soft Keys: These keys represent settings menus. They displayed option on a soft key may be different
depending on the menu the operator has chosen. The User pushes these key to make the displayed
selection