Seed Hawk AIRCART 2013 User Manual

Page 26

Text mode
Original mode

SEED HAWK

AIRCART OPERATOR’S MANUAL 21

4.2.4

AUGER TRANSPORT POSITON

NOTE: Fill auger should always be secured for
transport, no matter how short the distance.
Clean out auger prior to transport or storage.

1. Position the auger so that the tube is resting

on the locking mechanism at the back of the
aircart. In TBH configurations only, the
hopper can be rotated down for transport,
Figure 10.

2. The locking mechanism must be used to secure

auger when transporting at all times, Figure 11.

3. Be sure to secure locking mechanism by replacing

pin, Figure 12.

4. Lift and swing handle in towards the aircart,

then pull down to secure it. Push the auger
diverter valve back to the fan position.

Figure 10

Figure 11

Figure 12