Seed Hawk AIRCART 2013 - Manual (Page 54)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 49
3. Width: This is the width of the implement,
Navigate to this item and press “Enter”. A drop
down keypad will appear allowing you to enter
the implement width in the form XX.X feet or
meters depending on the units selected.
Navigate to the individual numbers and press
the spinner knob to accept.
When the total number is entered press the
“Enter” key to save the new width value.
NOTE: This is the only instance when the spinner Knob press and the “Enter” key perform
separate functions.
4. Volume: Sets the alarm volume level.
Navigate to this selection and press the
spinner knob to highlight the item. Rotate the
spinner knob to increase or decrease the
alarm volume and press the spinner knob or
“Enter” to set the new alarm volume setting.
5. Backlight: Sets the display backlight level.
Navigate to this selection and press the
spinner knob to highlight the item. Rotate the
spinner knob to increase or decrease the
backlight and press the spinner knob or
“Enter” to set the new backlight setting.