Seed Hawk AIRCART 2013 User Manual

Page 50

Text mode
Original mode

SEED HAWK

AIRCART OPERATOR’S MANUAL 45

11. Seeder Stationary Mode: This menu choice
allows you to enter a simulated ground speed so
the implement can be operated standing still to
perform operational checks and trouble shoot
problems

12. Remove all sensors: This menu choice allows
you to quickly unlearn all MuxBus sensors installed
on the system. This is a necessary step if it
becomes necessary to relearn the MuxBus system
on a monitor that sensors installed.

7.3.1

MUXBUS SENSOR SETTINGS AND INSTALLATION

At the “Menu Settings” screen use the navigation keys or the spinner dial place the highlight
bar on item 1 “MuxBus Sensor Setup”. Select this item by pressing the spinner dial or the
“Enter” key.

1. New system installation: Place the highlight bar on “Auto Detect”. Press “Install”.