0 loup iii operation, 1 normal startup – Seed Hawk AIRCART 2013 User Manual
Page 41

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 36
7.0 LOUP III OPERATION
7.1 NORMAL STARTUP
For everyday operation the monitor will remember all settings that have been saved from the
previous use.
Press the power button to begin
.
As the Seed Hawk Logo is displayed, the monitor performs a “self test”. During this self test,
the monitor will check that all “learned” sensors are connected.
Once this test is complete, all sensors found by the system are listed as shown in the image
below.
Press the soft key labeled “OK” to continue to the Normal Operate Screen.