Seed Hawk AIRCART 2013 - Manual (Page 24)

SEED HAWK
®
AIRCART OPERATOR’S MANUAL 19
Figure 5
4.2.1 POSITIONING THE AUGER
NOTE: Ensure that the area in the vicinity of auger operation is free of obstructions and that
all bystanders, especially children, are kept at a safe distance before positioning or
operating the auger.
1. Ensure your tractor circuit is engaged in
the correct direction prior to engaging the
auger diverter valve. If circuit is already
engaged direct the fan diverter valve to the
fill auger position from the fan location,
Figure 5. Use the remote provided to move
the auger in and out of transport. NOTE: If
remote does not operate properly use
manual levers provided as backup control.
2. Remove locking pin, lift the locking handle,
and swing out to usable position. Unlock
lever by pushing it down to take the auger
out of transport, Figure 6.
3. Move the outer arm first when positioning
auger, Figure 7.
4. Unfold auger and position it where filling or
emptying the aircart is optimal.
5. Allow hopper to come into contact with the
ground before final positioning.
6. Hydraulic cylinder will hold the auger’s
position so it will not move if positioned on
level ground.
Figure 7
Figure 6