beautypg.com

Figure 59 – Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) User Manual

Page 98

background image

78

Fabric OS Encryption Administrator’s Guide (DPM)

53-1002922-01

Tape LUN write early and read ahead

2

FIGURE 59

Encryption Target Tape LUNs dialog box - Setting tape LUN read ahead and write early

4. In the Enable Write EarlyAck and Enable Read Ahead columns, when the table is populated,

you can set these features as desired for each LUN:

To enable write early for a specific tape LUN, select Enable Write Early Ack for that LUN.

To enable read ahead for a specific LUN, select Enable Read Ahead for that LUN.

To disable write early for a specific tape LUN, deselect Enable Write Early Ack for that LUN.

To disable read ahead for a specific LUN, deselect Enable Read Ahead for that LUN.

5. Click OK.

6. Commit the changes on the related crypto target container:

a. Select Configure > Encryption from the menu task bar to display the Encryption Center

dialog box (Refer to

Figure 6

on page 14).

b. Select a group, switch, or engine from the Encryption Center Devices table that contains

the storage device to be configured, then select Group/Switch/Engine > Targets from the
menu task bar.

NOTE

You can also select a group, switch, or engine from the Encryption Center Devices table,
then click the Targets icon.

c. Select the appropriate crypto target container, then click Commit.