If metadata is not present on the lun – Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 244
224
Fabric OS Encryption Administrator’s Guide (DPM)
53-1002922-01
Data mirroring deployment
4
If metadata is not present on the LUN
Beginning with Fabric OS version 6.4.0, this problem is eliminated by enabling the remote
replication mode. Remote replication mode may be enabled from either BNA (refer to
on page 71) or from the command line interface (refer to
In very rare cases, when remote replication mode is not enabled, metadata may not be present on
the LUN. The record archived in the key vault refers only to the primary LUN, and not to the LUN
replication. With no metadata present in the replicated blocks, there is no key ID to use to retrieve
the DEK from the key vault. User intervention is needed to query the key vault to get the key ID.
1. Map the primary LUN to the replicated or snapshot LUN.
2. Based on the primary LUN information (mainly target WWN, LUN number, or LUN SN), you can
query key records from the key vaults. For this, you need to refer to key management system’s
documentation to find out how to query key records.
3. Identify the key used during the replication or snapshot of the LUN based on the creation and
expiry time of the key at the time the LUN was replicated.
4. When the record is identified, provide the Key ID for the key record as input to the LUN addition
for this LUN on the encryption switch or blade. This is done from the key management system’s
user interface. Refer to the user documentation for the key management system.