Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 94)

74 Fabric OS Encryption Administrator’s Guide (DPM)
53-1002922-01
Adding target tape LUNs for encryption
2
FIGURE 55 Encryption Targets dialog box
3. Select a target tape storage device from the Encryption Targets table, then click LUNs.
The Encryption Target Tape LUNs dialog box displays. (Refer to Figure 56 .)
FIGURE 56 Encryption Target Tape LUNs dialog box
4. Click Add.
The Add Encryption Target Tape LUNs dialog box displays. (Refer to Figure 57 .) A table of all
LUNs in the storage device that are visible to hosts is displayed. LUNs are identified by the Host
world wide name, LUN number, Volume Label Prefix number, and Enable Write Early ACK and
Enable Read Ahead status. The LUN numbers may be different for different hosts.