Saving a master key to a key vault – Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 107

Fabric OS Encryption Administrator’s Guide (DPM)
87
53-1002922-01
Master keys
2
The Master Key Backup dialog box displays, but only if the master key has already been
generated. (Refer to
.)
FIGURE 66
Master Key Backup dialog box - Backup Destination to file
4. Select File as the Backup Destination.
5. Enter a file name, or browse to the desired location.
6. Enter the passphrase, which is required for restoring the master key. The passphrase can be
between eight and 40 characters, and any character is allowed.
7. Re-enter the passphrase for verification, then click OK.
ATTENTION
Save the passphrase. This passphrase is required if you ever need to restore the master key from
the file.
Saving a master key to a key vault
Use the following procedure to save the master key to a key vault.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
3. Select Backup Master Key as the Master Key Action.
The Backup Master Key for Encryption Group dialog box displays. (Refer to