Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 109)

Fabric OS Encryption Administrator’s Guide (DPM) 89
53-1002922-01
Master keys
2
FIGURE 68 Backup Master Key for Encryption Group dialog box - Backup Destination to smart cards
4. Select A Recovery Set of Smart Cards as the Backup Destination.
5. Enter the recovery card set size.
6. Insert the first blank card and wait for the card serial number to appear.
7. Run the additional cards through the reader that are needed for the set. As you read each card,
the card ID displays in the Card Serial# field. Be sure to wait for the ID to appear.
8. Enter the mandatory last name and first name of the person to whom the card is assigned.
9. Enter a Card Password.
10. Re-enter the password for verification.
11. Record and store the password in a secure location.
12. Click Write Card.
You are prompted to insert the next card, up to the number of cards specified in step 5 .
13. Repeat step 6 through step 12 for each card in the set.
14. After the last card is written, click OK in the Master Key Backup dialog box to finish the
operation.