Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 282

262
Fabric OS Encryption Administrator’s Guide (DPM)
53-1002922-01
Encryption group merge and split use cases
6
Display the encryption group state again.
Node182:admin-> cryptocfg --show -groupcfg
Node182 should now show up with an Encryption Group state of
CLUSTER_STATE_CONVERGED.
In this two node example, there is only one other node in the encryption group, and therefore
the is only one node to deregister. When you have a 3:1 split or a 2:2 split, issue the following
command from the group leader node you are keeping.
Switch:admin-> cryptocfg --show -groupmember -all
The output of this command will show you every node that was ever a part of this encryption
group. Look at State: for all nodes to determine which ones to deregister. Only the nodes with a
state of DEF_NODE_STATE_DISCOVERING must be deregistered from the group leader node
you are keeping. The example below shows that the node with WWN 10:00:00:05:1e:c1:9a:86
needs to be deregistered.
Switch:admin-> cryptocfg --show -groupmember -all
NODE LIST
Total Number of defined nodes: 4
Group Leader Node Name: 10:00:00:05:1e:54:22:44
Encryption Group state: CLUSTER_STATE_DEGRADED
…. Output truncated…
Node Name: 10:00:00:05:1e:c1:9a:86
State: DEF_NODE_STATE_DISCOVERING
…Output truncated…
4. Go to every other encryption group island to delete the encryption group.
NOTE
If you have four encryption nodes that have split into a pair of two node encryption groups,
refer to
on page 263 for a description of an additional step to take
before deleting the encryption group.
In this example, the encryption group island consists only of Node181. From Node181, enter
the following command:
Node181:admin-> cryptocfg --delete -encgroup
This will permanently delete the encryption group configuration
ARE YOU SURE (yes, y, no, n): [no] yes
WARNING: Tape, HA cluster or Container is configured in this node.
Do you want to do EG deletion and retain Tape, HA cluster or Container
configuration
ARE YOU SURE (yes, y, no, n): [no] yes
Encryption group delete status: Operation Succeeded.