Generating and backing up the master key – Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 166
146
Fabric OS Encryption Administrator’s Guide (DPM)
53-1002922-01
Generating and backing up the master key
3
SecurityAdmin:switch> cryptocfg --reg -keyvault
primary
NOTE
If you are using an DPM cluster for high availability, the IP address specified as
is the
virtual IP address of the DPM cluster.
4. As the switches come up, enable the encryption engines.
SecurityAdmin:switch> cryptocfg --enableEE
Operation succeeded.
Generating and backing up the master key
You must generate a master key on the group leader, and export it to a secure backup location so
that it can be restored, if necessary. The master key is used to encrypt DEKs for transmission to
and from a DPM.
The backup location may be a DPM, a local file, or a secure external SCP-capable host. All three
options are shown in the following procedure. Note that the Brocade SAN Management application
provides the additional option of backing up the master key to system cards.
1. Generate the master key on the group leader.
SecurityAdmin:switch> cryptocfg --genmasterkey
Master key generated. The master key should be
exported before further operations are performed.
2. Export the master key to the key vault. Make a note of the key ID and the passphrase. You will
need the Key ID and passphrase should you have to restore the master key from the key vault.
SecurityAdmin:switch> cryptocfg --exportmasterkey
Enter the passphrase: passphrase
Master key exported. Key ID: 8f:88:45:32:8e:bf:eb:44:c4:bc:aa:2a:c1:69:94:2
3. Save the master key to a file.
SecurityAdmin:switch> cryptocfg --exportmasterkey -file
Master key file generated.
4. Export the master key to an SCP-capable external host:
SecurityAdmin:switch> cryptocfg --export -scp -currentMK \
192.168.38.245 mylogin GL_MK.mk
Password:
Operation succeeded.
5. Display the group configuration.
SecurityAdmin:switch> cryptocfg --show -groupcfg
Encryption Group Name: brocade
Failback mode:
Manual
Heartbeat misses: 3
Heartbeat timeout: 2
Key Vault Type:
DPM
Primary Key Vault: