Brocade Fabric OS Encryption Administrator’s Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 82)

62 Fabric OS Encryption Administrator’s Guide (DPM)
53-1002922-01
Configuring encryption storage targets
2
FIGURE 45 Configuration Status screen
The screen contains the following information:
• Device: The device type (target or host).
• Device Port WWN: The port world wide name.
• Represented by VI/VT: The virtual target (VT) mapped to the physical target or virtual
initiator (VI) representing the host.
• VI/VT Port WWN: The port world wide name of the virtual target or virtual initiator.
• VI/VT Node WWN: The node world wide name of the virtual target or virtual initiator.
13. Review any post-configuration instructions or messages, which you can copy to a clipboard or
print for later, then click Next.
The Next Steps screen displays. (Refer to Figure 46 .) Post-configuration instructions for
installing public key certificates for the encryption switch are displayed. These instructions are
specific to the key vault type.