beautypg.com

Brocade ICX 6650 Hardware Installation Guide User Manual

Page 87

background image

CAUTION

Ensure that the device does not overload the power circuits, wiring, and over-current
protection. To determine the possibility of overloading the supply circuits, add the
ampere (amp) ratings of all devices installed on the same circuit as the device.
Compare this total with the rating limit for the circuit. The maximum ampere ratings are
usually printed on the devices near the input power connectors.

PRECAUCIÓN

Verifique que el instrumento no sobrecargue los circuitos de corriente, el cableado y la
protección para sobrecargas. Para determinar la posibilidad de sobrecarga en los circuitos de
suministros, añada las capacidades nominales de corriente (amp) de todos los instrumentos
instalados en el mismo circuito que el instrumento. Compare esta suma con el límite nominal
para el circuito. Las capacidades nominales de corriente máximas están generalmente
impresas en los instrumentos, cerca de los conectores de corriente de entrada.

CAUTION

Use the

erase startup-config

command only for new systems. If you enter this

command on a system you have already configured, the command erases the
configuration. If you accidentally do erase the configuration on a configured system,
enter the

write memory

command to save the running configuration to the startup-

config file.

VORSICHT

Verwenden Sie den Befehl "

Erase startup-config

" (Löschen Startup-Konfig) nur für neue

Systeme. Wenn Sie diesen Befehl in ein bereits konfiguriertes System eingeben, löscht der
Befehl die Konfiguration. Falls Sie aus Versehen die Konfiguration eines bereits konfigurierten
Systems löschen, geben Sie den Befehl "

Write Memory

" (Speicher schreiben) ein, um die

laufende Konfiguration in der Startup-Konfig-Datei zu speichern.

MISE EN GARDE N'utilisez la commande

erase startup-config

que pour les nouveaux systèmes. Si vous

entrez cette commande sur un système que vous avez déjà configuré, elle efface la
configuration. Si vous effacez la configuration par accident sur un système configuré, entrez la
commande

write memory

pour enregistrer la configuration actuelle dans le fichier startup-

config.

PRECAUCIÓN

Use el comando

erase startup-config

(borrar configuración de inicio) para sistemas nuevos

solamente. Si usted introduce este comando en un sistema que ya ha configurado, el comando
borrará la configuración. Si usted borra accidentalmente la configuración en un sistema ya
configurado, introduzca el comando

write memory

(escribir memoria) para guardar la

configuración en ejecución en el archivo startup-config.

CAUTION

Never leave tools inside the chassis.

VORSICHT

Lassen Sie keine Werkzeuge im Chassis zurück.

MISE EN GARDE

Ne laissez jamais d'outils à l'intérieur du châssis.

PRECAUCIÓN

No deje nunca herramientas en el interior del chasis.

CAUTION

Changes or modifications made to this device that are not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.

VORSICHT

Falls dieses Gerät verändert oder modifiziert wird, ohne die ausdrückliche Genehmigung der für
die Einhaltung der Anforderungen verantwortlichen Partei einzuholen, kann dem Benutzer der
weitere Betrieb des Gerätes untersagt werden.

Brocade ICX 6650 Cautions and Danger Notices

Brocade ICX 6650 Hardware Installation Guide

85

53-1003083-01