Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 17
17
IM 04L31A01-02E
9.
Press the
End soft key
.
A confirmation window shown below opens.
10.
Press the
DISP/ENTER key
to confirm the settings.
Setting the Control Input Range in Setting Mode
1.
From the operation display, click the
MENU key
to display the control setting menu
shown below.
2.
Press the
#1 soft key
(Control input range).
3.
Press the
arrow keys
to move the cursor (blue) to the setup item box, press the
soft
key
of each value according to the following figure.
To set the measurement span (span lower/upper-limit, press the
Input soft key
to
open a numeric entry pop-up window as shown in the figure below. Enter the value
using the
Character/Number key
and the
Space soft key
and then press the
DISP/
ENTER key
.
Setting the Input Range on the Primary Loop of Cascade Control
Select 1
Select RTD
Select PT
Set to 0.0
Set to 100.0
Numeric entry pop-up
window
4.
Press the
DISP/ENTER key
.
A confirmation window shown below opens.
5.
Press the
DISP/ENTER key
to confirm the settings.
Examples of Control Setup Operation