Yokogawa IR400 - Manual (Page 114)

Revision Record
Manual Title : IR400 Infrared Gas Analyzer
Manual Number : IM 11G02N01-01E
Edition Date Remark (s)
1s t Oct. 2002 Newly published
2nd Aug. 2006 Fully revised due to style change to S3
P. v., Added "After-Sales Warranty"
Section 2.1, "Name and description of main unit": Changed drawing partly
Section 3.4, "Piping": Changed drawing partly
Section 3.4.7, "Example configuration of gas sampling system": Changed drawing
Section 5.1, "Name and description of operation panel": Changed drawing partly
Section 9.1.1, "Standard specifications": Changed table "Measurable component and
measurement range"
Section 9.1.5, "Standard Requirements for Sample Gas": Changed description
Section 9.2, "Model and Suffix codes": Changed table partly
Section 9.2, "Measurable component and range
؊ availability check table ؊ ": (4),
"Double-component analyzer": Changed table partly
3rd Aug. 2007 Section 5.4, "General operation": Partially changed the figure.
Section 6.2, "Calibration setting": Partially changed the figure and descriptions in "Setting
range of values."
Section 6.4.1, "Auto calibration": Partially changed the figure and descriptions in Caution.
Section 6.4.2.1, "Execution of auto calibration": Partially changed descriptions in (3).
Section 6.4.2.2, "Forced stop of auto calibration": Partially changed descriptions in (3).
Section 6.5.1, "Auto zero calibration": Partially changed descriptions in Caution.
Section 6.5.2.1, "Forced run/stop of auto zero calibration": Partially changed descriptions in
(3).
Section 6.5.2.2, "Forced stop of auto zero calibration": Partially changed descriptions in (3).
Section 6.6, "Peak alarm setting": Partially changed the figure and descriptions.
Section 6.9.1, "Zero calibration": Partially changed the figure and descriptions in Caution.
Section 6.9.2, "Span calibration": Partially changed the figure.
Section 9.1, "General specifications," Safety and EMC conforming standards: Changed
descriptions and added Note.
Section 9.2, "Model and Suffix code": Deleted Footnote 8 and changed descriptions of
Footnote 8 (former 9).
Section 9.3, "External Dimensions": Changed power supply specification of NO
2
/NO
converter.
Section 9.3, "External Dimensions," NO
2
/NO Converter: Changed "Part number"
descriptions, added "Safety conforming standards" descriptions, deleted "CE Marking"
descriptions, and changed "External Dimensions" drawings,