Watlow Series SD31 PID with Optional Countdown Timer - Manual (Page 71)

Declaration of Conformity
Series SD
Watlow Winona, Inc.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following product:
Designation: Series SD
Model Numbers: SD(3, 4, 6, 8 or 9)(Any letter or number) – (H or L)(C, F, J or K)(A, C, J,
K or U) (A, C, E, F or K) – (A, D or R)(any three letters or numbers)
Classification: Temperature control, Installation Category II, Pollution degree 2
Rated Voltage and Frequency: 100 to 240 V~ (ac 50/60 Hz) or 24 to 28 V (ac 50/60 Hz or dc)
Rated Power Consumption: 10 VA maximum
Meets the essential requirements of the following European Union Directives by using the relevant
standards show below to indicate compliance.
89/336/EEC Electromagnetic Compatibility Directive
EN 61326 1997 With A1:1998
A2:2002
Electrical equipment for measurement, control and lab-
oratory use – EMC requirements (Industrial Immunity,
Class B Emissions).
EN 61000-4-2 1996 With A1, 1998 Electrostatic Discharge Immunity
EN 61000-4-3 1997 Radiated Field Immunity
EN 61000-4-4 1995 Electrical Fast-Transient / Burst Immunity
EN 61000-4-5 1995 With A1, 1996 Surge Immunity
EN 61000-4-6 1996 Conducted Immunity
EN 61000-4-11 1994 Voltage Dips, Short Interruptions and Voltage Variations
Immunity
EN 61000-3-2 2000 ED.2. Harmonic Current Emissions
EN 61000-3-3 1995 With A1:1998 Voltage Fluctuations and Flicker
73/23/EEC Low-Voltage Directive
EN 61010-1 2001 Safety Requirements of electrical equipment for mea-
surement, control and laboratory use. Part 1: General
requirements
Raymond D. Feller III Winona, Minnesota, USA
Name of Authorized Representative Place of Issue
General Manager May 2005
Title of Authorized Representative Date of Issue
Signature of Authorized Representative