A4sd, Setup-output, Alarm 4 side – Watlow Series 988 User Manual

Page 57

Text mode
Original mode

WATLOW Series 988 User’s Manual

4.29

Setup Menus, Chapter 4

Setup-Output

Alarm 4 Side

Select what triggers alarm 4.

•

[both] triggers an alarm when the signal

≤ [A4LO] or ≥ [A4HI].

•

[HiGH] triggers an alarm when the signal

≥ [A4HI].

•

[LOW] triggers an alarm when the signal

≤ [A4LO].

[A4Sd] This prompt appears only on controllers equipped with output 4
hardware for a relay (98_ _-_ _ _ _-_B_ _, 98_ _-_ _ _ _-_D_ _ ,
98_ _-_ _ _ _-_E_ _ or 98_ _-_ _ _ _-_K_ _) or switched dc (98_ _-_ _ _ _-_C_ _)
and with

[`Ot4] set to [`AL4] or [AL4n].

Default

↓

[BOTH]

[HIGH]

[LOW]

[A4SD]

NOTE:
See Chapter 7 for
more information
on alarms.

[A4Sd]