Watlow 12LS Controller - Manual (Page 91)

4-58
4.7.19 EDIT PROFILE CYCLES
This menu is used to enter the desired cycles for this profile. Cycles is the number of times this
profile is to be repeated without stopping. Cycles may be entered from 1 to 99 or C for
Continuous. The default value is 1.
|----------------|
Display: ¦ x REPEAT CYCLES¦
¦ ? yy ¦
|----------------|
The ? flashes.
x is the profile designator [A-L].
yy is the current cycle value.
YES Change number of repeat cycles.
Lower display CYCLE=xx
UP/DOWN Set cycle count.
ENTER Store new cycle count. Display returns to Select Profile for Editing.
BACK Return to SETUP R/S PROFILE? prompt.
NO Leave repeat cycles as entered. Display returns to Select Profile for Editing.
BACK Return to SETUP R/S PROFILE? prompt.