Watlow 12LS Controller - Manual (Page 66)

4-33
4.5.6.1 DIGITAL INPUT TESTING
This is a view-only display showing the logic state of the 8 digital inputs as 1's (High) or 0's (Low). The display
appears as:
|----------------|
¦ DIGITAL INPUTS ¦
¦ xxxxxxxx ¦
|----------------|
Input 1 --| |-- Input 8
Press any key to advance to the TEST OUTPUT SELECTION display.
4.5.6.2 TEST OUTPUT SELECTION
This menu allows the user to select one of the 9 digital outputs for manual operation. The display appears as :
|----------------|
¦ DIGITAL OUTPUTS¦
¦ TEST OUTPUT? x¦
|----------------|
Press YES to select the menu or NO to go on to the OUTPUT TEST display.
Press UP and DOWN to choose the output number for test.
Press ENTER to select the displayed output for test or press BACK to return to the SINGLE LOOP display.
4.5.6.3 DIGITAL OUTPUT TEST
Use this display to manually toggle the state of a digital output between ON or OFF. The display will appear as :
|----------------|
¦ DIGITAL OUTPUT ¦
¦ NUMBER yy? xxx¦
|----------------|
The lower line of the display shows the selected output number and the current output state, ON or OFF.
Press YES or NO to toggle the output state between OFF and ON.
Press the BACK key to return to the Test Output Selection menu.